Healthcare · Moraph software

Infection Control & Contact Tracing

Know who shared a room, a unit or a shift with an infectious case, and act on it

Book a demonstrationRequest a technical briefingFactsheet

Overview

What you are buying

Infection Control & Contact Tracing reconstructs where patients and staff were inside your facility from admission, transfer and bed data, care team assignments and, where you have one, your real-time location system. When a case is confirmed, your infection preventionists see the people who may have been exposed, decide who needs follow-up, and track isolation, testing and employee health actions to completion. During an outbreak the same records show how cases are connected across units and time.

The problem it solves

When a patient tests positive for a transmissible infection, infection preventionists have to work out who shared the room, the unit, the equipment and the staff. That means pulling bed histories from the EHR, asking managers for staffing sheets, and building exposure lists in spreadsheets, often days after the exposure. Employee health works from a separate list, follow-up testing is tracked by hand, and when an outbreak spans several units it is hard to see how cases connect or to show the health department what was done.

  • Bed histories and staffing records are pulled by hand from several systems
  • Exposure lists are built in spreadsheets and differ between infection prevention and employee health
  • Follow-up testing, isolation and work restrictions are tracked separately
  • Outbreak timelines are hard to assemble for leadership and the health department

Who uses it

  • Infection preventionists and hospital epidemiologists
  • Employee and occupational health teams who follow up exposed staff
  • Nurse managers and unit leaders who act on isolation and cohorting decisions
  • Quality and patient safety leaders who report healthcare-associated infections
  • Emergency management teams who coordinate outbreak response

Requirements it supports

Medicare Conditions of Participation: infection prevention and control (42 CFR 482.42)HIPAA Privacy Rule disclosures for public health activities (45 CFR 164.512(b))HIPAA Security Rule (45 CFR Part 164, Subpart C)OSHA Bloodborne Pathogens Standard (29 CFR 1910.1030)CDC National Healthcare Safety Network (NHSN) reporting requirementsState reportable disease and outbreak reporting laws

The product supports these requirements; meeting them remains your organization’s responsibility.

See how it works

A short walkthrough

Illustrative screens with fictional sample data. They show the workflow, not any client’s data or configuration, and the layout of the product itself differs. A live demonstration uses the product with sample data.

  1. Step 1

    A new case

    A positive result on the watch list opens an index case with the patient's location and isolation status.

    Case IC-0417 · Patient 30881 (fictional)

    Organism
    Example respiratory virus (fictional)
    Result received
    Day 5 of admission
    Isolation
    Not on precautions at time of result
    Exposure window
    Set by rule, 2 days before specimen
    Current location
    4 West, room 412

    Next steps

    • Confirm the case meets your criteria
    • Review the location history for the window
    • Review proposed contacts
    A positive result on the watch list opens an index case with the patient's location and isolation status.

  2. Step 2

    Where the patient was

    The location history shows every room and unit in the exposure window, assembled from admission and transfer data.

    Patient 30881 · Exposure window

    1. Emergency department, bay 6ADT
    2. Imaging, CT room 2Order and ADT
    3. 4 West, room 408, shared roomADT
    4. Transferred to 4 West, room 412ADT
    5. Specimen collectedLaboratory
    The location history shows every room and unit in the exposure window, assembled from admission and transfer data.

  3. Step 3

    Proposed contacts

    Patients and staff who overlapped with the case are listed with the type and length of contact, for the infection preventionist to decide.

    ContactTypeWhereOverlapSourceDecision
    Patient 30902Roommate4 West, room 40831 hoursADTExposed
    Staff 7741 (RN)Assigned nurse4 West2 shiftsAssignmentsExposed
    Staff 6210 (RT)Respiratory therapy4 West, room 4083 visitsRTLSExposed
    Patient 30876Same unit4 West, room 41029 hoursADTNot exposed, separate room
    Staff 5389 (tech)ImagingCT room 220 minutesRTLSPending review
    Patients and staff who overlapped with the case are listed with the type and length of contact, for the infection preventionist to decide.

  4. Step 4

    Follow-up to completion

    Each exposed contact has follow-up actions with a responsible team and due date, tracked until closed.

    ContactActionResponsibleDueStatus
    Patient 30902Start precautions4 West unit managerTodayDone
    Patient 30902Test on day 34 West unit managerIn 3 daysOpen
    Staff 7741 (RN)Exposure follow-upEmployee healthTodayOverdue
    Staff 6210 (RT)Exposure follow-upEmployee healthTodayContacted, cleared to work
    Each exposed contact has follow-up actions with a responsible team and due date, tracked until closed.

  5. Step 5

    Linking cases into an outbreak

    When cases connect, the outbreak workspace shows where and when they occurred and the control measures in place.

    Outbreak OB-012 · 4 West (fictional)

    Status
    Open
    Cases
    4 patients, 2 staff
    Units affected
    4 West, 4 East
    Declared
    Approved by hospital epidemiologist
    Health department
    Line list awaiting approval

    Control measures

    • Cohorting on 4 West
    • Closed to new admissions, pending review
    • Enhanced cleaning of shared equipment
    • Staff testing for 4 West
    When cases connect, the outbreak workspace shows where and when they occurred and the control measures in place.

  6. Step 6

    Staff follow-up in employee health

    Employee health works staff exposures in its own view; unit managers see only whether staff are cleared to work.

    StaffExposureDateTestingWork status
    Staff 7741Assigned nurse, Case IC-0417Day 5ScheduledRestricted pending result
    Staff 6210Respiratory therapy, Case IC-0417Day 5NegativeCleared
    Staff 8803Self-reported, 4 WestDay 6ScheduledCleared with monitoring
    Employee health works staff exposures in its own view; unit managers see only whether staff are cleared to work.

Workflows

The principal workflows

  1. Detect

    Positive results for organisms and conditions you choose arrive from your laboratory system and open an index case for an infection preventionist to review.

    • Laboratory results for the organisms on your watch list arrive by HL7 interface
    • An index case is opened with the patient's admission and isolation status
    • Infection preventionist confirms the case meets your criteria or closes it
    • Exposure window is set from your organism-specific rules and adjusted where needed
    • Notifiable conditions are flagged for reporting to the health department

  2. Trace

    For the exposure window, the product lists the patients who shared a room or unit with the case and the staff assigned to them, using bed movements, care team assignments and location data where available.

    • Bed and unit history assembled from admission, discharge and transfer messages
    • Care team assignments and staff schedules matched to the case's locations
    • Real-time location data added where your facility has it
    • Each possible contact listed with the type and length of overlap
    • Infection preventionist reviews the list and marks who is considered exposed

  3. Follow up

    Exposed patients go to their units for isolation or testing actions, and exposed staff go to employee health, with each action tracked to completion.

    • Patient follow-up tasks sent to the responsible unit and clinician
    • Staff exposures sent to employee health, with only the information they need
    • Testing, isolation, prophylaxis and work restriction decisions recorded
    • Results and outcomes recorded against each contact
    • Open follow-ups listed until each is closed

  4. Manage outbreaks

    When cases are linked, they are grouped into an outbreak with a timeline, a unit map and a record of control measures, ready for leadership and the health department.

    • Infection preventionist links related cases into an outbreak
    • Epidemic curve and unit timeline show where and when cases occurred
    • Control measures such as cohorting, closure to admissions and enhanced cleaning recorded
    • Line list prepared for the health department and released by your staff
    • Outbreak closed with a summary when your criteria are met

Roles and permissions

Who does what in the product

Each role below is a starting point. During implementation we set them up to match your teams, and every action anyone takes is recorded in the audit trail.

Infection preventionist

Infection preventionist, infection control practitioner, infection prevention nurse

Works each case from positive result to completed follow-up, and decides which contacts are considered exposed.

Sees

  • Index cases and the patient's location history
  • Proposed contacts with the type and length of overlap
  • Follow-up status for every contact
  • Isolation status across the facility

Does

  • Confirms or closes index cases
  • Adjusts the exposure window for a case with a recorded reason
  • Marks contacts as exposed or not exposed with a reason
  • Assigns patient follow-up to units and sends staff exposures to employee health
  • Links cases into an outbreak and records control measures
  • Prepares line lists for the health department

Cannot

  • Change organism rules without epidemiologist approval
  • See staff test results and work restrictions beyond what employee health shares
  • Release a report to the health department without the approval your policy requires
Approvals
Outbreak declarations and health department reports are approved by the hospital epidemiologist or the person your policy names.
Notified about
New positive results on the watch list, follow-ups overdue, and new cases on units with an open outbreak.

Hospital epidemiologist

Hospital epidemiologist, infection prevention medical director, chair of the infection control committee

Owns the program's rules and the decisions that carry the most weight: declaring and closing outbreaks and what is reported outside the facility.

Sees

  • Every case, contact list and outbreak
  • Organism rules and their change history
  • Program reports and surveillance trends
  • The full audit trail

Does

  • Approves changes to organism rules and exposure definitions
  • Declares and closes outbreaks
  • Approves line lists and reports before they are released
  • Reviews exposure decisions where infection preventionists disagree
  • Prepares reports for the infection control committee

Cannot

  • Approve a rule change they proposed themselves without a second approver
  • Edit or delete entries in the audit trail
  • See employee health records beyond what employee health shares
Approvals
Approves organism rule changes, outbreak declarations and external reports; their own rule changes need a second designated approver.
Notified about
Rule changes and reports awaiting approval, new outbreaks proposed, and cases of conditions you mark for immediate attention.

Employee health

Employee health nurse, occupational health clinician, employee health manager

Follows up staff who were exposed, under your employee health policies, and keeps staff health information separate from patient records.

Sees

  • Staff exposures sent to them, with date, type and place
  • Testing, prophylaxis and work restriction records for staff
  • Open staff follow-ups and their due dates

Does

  • Contacts exposed staff and records the outcome
  • Records testing, prophylaxis and work restriction decisions
  • Returns a staff member to work when your criteria are met
  • Flags a staff member as a possible source for the infection preventionist
  • Records exposures reported by staff that tracing did not find

Cannot

  • See patient details beyond the exposure itself
  • Change which contacts are considered exposed
  • Share staff health details with unit managers beyond work status
Approvals
Work restriction decisions follow your employee health policy; unit managers see only whether a staff member is cleared to work.
Notified about
New staff exposures assigned to them, follow-ups coming due and test results to review.

Unit manager

Nurse manager, charge nurse, unit director

Carries out the actions assigned to their unit and keeps the infection prevention team informed.

Sees

  • Follow-up tasks for patients on their unit
  • Isolation status of patients on their unit
  • Whether staff on their unit are cleared to work
  • Open outbreaks affecting their unit

Does

  • Completes isolation, testing and cohorting tasks
  • Records why a task could not be completed
  • Reports staffing or room constraints that affect cohorting
  • Confirms enhanced cleaning or other control measures on the unit

Cannot

  • See contacts or cases on other units
  • See staff health details beyond work status
  • Mark contacts as exposed or not exposed
Approvals
None; completed tasks are reviewed by the infection preventionist.
Notified about
New follow-up tasks for their unit, tasks overdue, and outbreak control measures affecting the unit.

Quality analyst

Quality analyst, infection prevention data analyst, patient safety analyst

Prepares surveillance, outbreak and committee reporting from the records the infection prevention team keeps.

Sees

  • Case, contact and outbreak data within their scope
  • Surveillance trends by organism and unit
  • Report history

Does

  • Builds and schedules reports
  • Prepares committee and leadership summaries
  • Prepares data for NHSN reporting for review by the infection prevention team
  • Checks data completeness and flags gaps

Cannot

  • Change cases, exposure decisions or follow-ups
  • Release reports outside the facility
  • See employee health details
Approvals
Reports released outside the facility are approved by the hospital epidemiologist.
Notified about
Scheduled reports completed and data completeness problems found.

Auditor or surveyor (read-only)

Internal auditor, compliance officer, accreditation surveyor or health department reviewer (under temporary access)

Reviews the program's records and decisions without being able to change anything.

Sees

  • Cases, outbreaks and reports within the scope granted
  • Organism rules and their history
  • The audit trail

Does

  • Searches and reads records within their scope
  • Exports records they have been given access to, with each export logged
  • Leaves review notes where enabled

Cannot

  • Change, approve or delete anything
  • See records outside the scope and dates granted
  • Keep access after it expires
Approvals
Their access is approved by the hospital epidemiologist or an administrator, with a scope and an end date.
Notified about
Nothing by default; access granted and expiring is confirmed to the person who approved it.

Administrator

Application administrator, clinical systems analyst

Manages users, roles, interfaces and unit settings without taking part in exposure decisions.

Sees

  • Users, roles and unit structure
  • Interface status for laboratory, admission and location data
  • The record of permission changes

Does

  • Adds and removes users, or maps them from single sign-on groups
  • Assigns roles and units
  • Maintains the unit and room list
  • Monitors interface errors and works them with Moraph support
  • Runs access review reports

Cannot

  • Open cases, contacts or employee health records
  • Change organism rules
  • Grant themselves a clinical role without a second administrator
Approvals
Role changes that grant access to employee health records are approved by the employee health manager.
Notified about
Interface errors, access reviews coming due and accounts not used for a period your policy sets.

Permissions at a glance

ActionInfection prevEpidemiologistEmp. healthUnit managerQualityAuditorAdmin
Confirm or close index casesFullFullNo accessNo accessNo accessNo accessNo access
View location history and contactsFullFullOwn work onlyOwn work onlyView onlyView onlyNo access
Mark contacts as exposedFullFullNo accessNo accessNo accessNo accessNo access
Complete patient follow-up tasksFullView onlyNo accessOwn work onlyNo accessNo accessNo access
Record staff testing and work restrictionsNo accessNo accessFullNo accessNo accessNo accessNo access
Declare or close an outbreakFullApprovesNo accessNo accessNo accessView onlyNo access
Change organism rulesNo accessApprovesNo accessNo accessNo accessView onlyNo access
Release health department reportsFullApprovesNo accessNo accessNo accessView onlyNo access
Build and schedule reportsFullFullOwn work onlyNo accessFullNo accessNo access
View audit trailNo accessView onlyNo accessNo accessNo accessView onlyView only
Manage users and rolesNo accessApprovesNo accessNo accessNo accessNo accessFull
  • Full
  • Own work only
  • Approves
  • View only
  • No access

How access is controlled

  • Employee health records are kept apart from patient records: infection preventionists see that a staff member was exposed and followed up, and unit managers see only whether a staff member is cleared to work.
  • The product proposes contacts; people decide. Every exposure decision, adjusted window and outbreak declaration is recorded with who made it and why.
  • Roles are configured with you during implementation. You can rename them, add custom roles and limit unit managers to their own units, and every permission change is recorded in the audit trail.
  • Staff sign in through your identity provider, and roles can follow its groups. Surveyors and health department reviewers get temporary read-only access with a defined scope and an end date.

Features

What it does

Location history

A patient's rooms, beds and units over any period, assembled from admission, discharge and transfer messages and shown as a timeline.

Contact lists

Patients and staff who overlapped with a case in the exposure window, each with the type of contact, place and length of overlap.

Organism rules

Exposure windows, contact definitions and follow-up actions set per organism or condition by your infection prevention team.

Real-time location data

Where your facility has a real-time location system, badge and tag data adds staff and equipment proximity to the contact list.

Exposure review

Infection preventionists decide who is considered exposed; the product proposes contacts and records each decision and its reason.

Patient follow-up tracking

Isolation, testing and other actions for exposed patients, assigned to units and tracked until they are complete.

Employee health handoff

Staff exposures sent to employee health with the date, type and place of exposure, and work restriction and testing decisions recorded there.

Outbreak workspace

Linked cases, an epidemic curve, a unit timeline and a record of control measures for each outbreak.

Unit and room view

Who occupied a room or unit over a chosen period, for exposures linked to a place, such as a contaminated room or shared equipment.

Health department line lists

Line lists and case summaries in the format your health department asks for, prepared by your staff and released by them.

Isolation status board

Patients on transmission-based precautions by unit, with the reason and when precautions were started.

Equipment exposure tracing

Where equipment is tracked, the patients a shared device was used with between cleanings, to support device-related investigations.

Integrations

How it connects to your systems

Connects toHowWhat flows
Laboratory information systemPositive results for the organisms and conditions on your watch list, received by HL7 interface.In: microbiology and molecular results for watched organisms.
EHR admission, discharge and transferPatient admissions, bed moves and discharges, used to build location histories.In: ADT messages with unit, room and bed.
Staff scheduling and assignmentsShift schedules and patient assignments from your staffing or nurse assignment system, so staff contacts reflect who cared for the patient.In: shifts, units and patient assignments.
Real-time location systemWhere installed, badge and tag locations for staff and equipment add proximity detail to contact lists.In: location events for tagged staff and equipment.
Employee health systemStaff exposures sent to the employee health system you use, or worked in the product's employee health view.Out: staff exposures. In: work status.
Public health reportingLine lists and case summaries exported for your staff to submit to the health department or NHSN through their own channels.Out: line lists and summaries in the formats you agree.
Single sign-onStaff sign in through your identity provider (SAML or OpenID Connect).In: user identity and group membership for role assignment.
Work APICase, contact and outbreak data available to your data warehouse through the Moraph Work API.Out: cases, contacts, follow-ups and outbreaks.

Each integration is confirmed in discovery and specified in the design. See how an engagement progresses.

Security and privacy

How your data is protected

Single sign-on

Staff sign in through your identity provider, so your password and multi-factor policies apply.

Role-based access

What each person sees follows their role and unit, and employee health information is visible only to employee health.

Business associate agreement

Moraph signs a business associate agreement with your organization, because the product processes protected health information.

Encryption and keys

Data is encrypted in transit and at rest, with keys Moraph staff cannot use without explicit, time-bound authorization.

Complete audit trail

Every view, decision, export and report release is logged with the person and time, and cannot be edited.

US hosting

Data is hosted in Moraph's United States region; every release passes security testing gates and ships with a software bill of materials.

Company-wide controls, independent audits (SOC 2 Type II and ISO/IEC 27001) and data residency are described in our Trust Center, where you can request the evidence pack.

Reporting

What you can report on

11 standard reports, grouped by who uses them. Each shows who it is for, how it can be broken down, how it is delivered and what it is used for. The data behind them is also available to your own reporting tools.

Case work

Open cases and contacts

For infection preventionists

Every open index case with its contacts, the decisions made so far and follow-ups outstanding.

Break down by
Organism, Unit, Infection preventionist, Age
Delivered as
Live dashboard; CSV export
Used for
Making sure no case or contact is left unworked.

Follow-ups overdue

For infection preventionists, unit managers and employee health

Patient and staff follow-ups past the due date your rules set, with who is responsible.

Break down by
Unit, Follow-up type, Responsible team, Days overdue
Delivered as
Live work list; scheduled email
Used for
Closing follow-ups before they are missed.

Isolation status

For infection preventionists and unit managers

Patients on transmission-based precautions, the reason, start date and whether criteria for removal are met under your rules.

Break down by
Unit, Precaution type, Organism, Duration
Delivered as
Live dashboard
Used for
Keeping precautions in place where needed and removing them when they are not.

Outbreaks

Outbreak summary

For hospital epidemiologist, leadership and the infection control committee

Cases in the outbreak, the epidemic curve, units affected, control measures and their dates.

Break down by
Unit, Case type (patient or staff), Week, Control measure
Delivered as
Live view; PDF for committee and leadership
Used for
Briefing leadership and deciding when an outbreak can close.

Health department line list

For infection preventionists and hospital epidemiologist

The cases and fields your health department asks for, prepared for review and release by your staff.

Break down by
Outbreak, Case status, Onset date
Delivered as
CSV and PDF export after approval
Used for
Meeting outbreak reporting requests with a consistent record.

Control measure log

For hospital epidemiologist and surveyors

Every control measure recorded for an outbreak, when it started and ended, and who approved it.

Break down by
Outbreak, Measure, Unit, Date
Delivered as
Live view; PDF export
Used for
Showing what the facility did and when.

Surveillance

Cases by organism and unit

For infection preventionists and quality analysts

Confirmed cases over time by organism, unit and whether they were present on admission or acquired in the facility under your definitions.

Break down by
Organism, Unit, Month, Onset classification
Delivered as
Live dashboard; CSV export
Used for
Spotting clusters early and reporting trends to committee.

Exposure workload

For infection prevention leadership

Cases traced, contacts reviewed and follow-ups generated per period.

Break down by
Organism, Period, Infection preventionist
Delivered as
Live dashboard; CSV export
Used for
Understanding the effort tracing takes and staffing for it.

Staff exposures and work status

For employee health manager

Staff exposures, testing outcomes and work restrictions by period, without patient detail.

Break down by
Department, Exposure type, Outcome, Period
Delivered as
Live dashboard; CSV export
Used for
Managing staff follow-up and planning cover during restrictions.

Compliance and audit

Organism rule history

For hospital epidemiologist and surveyors

Every change to an exposure window, contact definition or follow-up rule, with who proposed and approved it.

Break down by
Organism, Change date, Approver
Delivered as
Live view; PDF and CSV export
Used for
Showing that the rules used for tracing were set and approved deliberately.

Audit trail extract

For compliance, privacy and internal audit

Who viewed or changed a case, contact or outbreak record, and every report released outside the facility.

Break down by
Record, User, Action, Date range
Delivered as
On request in the product; CSV and PDF export
Used for
Privacy monitoring and evidence for audits and surveys.

Exports, access and evidence

  • Every report can be exported to CSV, and summary and evidence reports to PDF. Reports can be scheduled to arrive by email for the people entitled to see them.
  • Filters can be saved, so infection preventionists, unit managers and employee health each keep their own views.
  • Case, contact and outbreak data is available through the Moraph Work API for reporting alongside your other quality data.
  • Reports respect each viewer's role: unit managers see their units, employee health reports carry no patient detail, and patient reports carry no staff health detail.
  • Reports for external use are released only after the approval your policy requires, and running and exporting any report is recorded in the audit trail.

Deployment

Where and how it runs

Moraph cloud

Hosted and operated by Moraph in the United States region, with interfaces to your laboratory, EHR and staffing systems.

Dedicated environment

A single-tenant environment for health systems whose policies require isolation, scoped in the proposal.

Health system deployment

One deployment across several facilities, so staff and patients who move between them can be traced, with each facility's team seeing its own work.

Security controls, independent audits and data residency are set out in our Trust Center. Engagement models and what drives a quotation are on Working with Moraph.

Implementation

What a rollout involves

The general phases are on Working with Moraph. For this product, they involve the following.

Data sources

We connect your laboratory, admission and transfer, and staffing data, and real-time location data where you have it. We need contacts from each system's team.

Unit and room mapping

Units, rooms and beds are mapped so locations from different systems line up, including shared spaces your team wants traced.

Organism rules

Watch lists, exposure windows, contact definitions and follow-up actions are configured with your infection prevention team and approved by your hospital epidemiologist.

Employee health workflow

Staff exposure handoff and work status sharing are set up with employee health, either in the product or with your existing system.

Retrospective testing

Past cases chosen by your team are traced in the product and compared with the lists your team built at the time.

Training and go-live

Infection preventionists, employee health, unit managers and analysts are trained on their own workflows before go-live.

Limitations

What it does not do

Worth knowing before you evaluate it.

  • Contact lists are only as complete as the location, assignment and schedule data you provide. Without a real-time location system, contacts are based on rooms, units and assignments, not proximity.
  • It does not decide who is exposed. It proposes contacts under rules your team sets, and infection preventionists make and record each decision.
  • It is not a laboratory system or an EHR, and it does not place isolation orders; it tracks the actions your staff take in those systems.
  • It does not submit reports to the health department or NHSN. Your staff review, approve and submit them through their own channels.
  • Visitors and contractors are traced only where your facility records their location, such as through a visitor management system you connect.
  • It does not provide clinical guidance on treatment or prophylaxis; follow-up actions are the ones your policies define.
  • Employee health workflows follow your policies and applicable employment law; the product records decisions but does not set work restriction criteria.
  • It is designed for US facilities and reporting requirements; public health reporting formats in other countries are not included.

Evaluation checklist

What to test in a demonstration or pilot

Questions worth putting to us, and to any other vendor you are considering.

  1. Trace a past case your team worked by hand and compare the contact lists
  2. Check that rooms and units from your ADT and staffing data line up correctly
  3. Have an infection preventionist work a case from positive result to closed follow-ups
  4. Confirm what unit managers and employee health can each see about the same exposure
  5. Build a sample outbreak and review the line list your health department would receive
  6. Review how organism rule changes are proposed, approved and recorded

Questions

Frequently asked questions

Do we need a real-time location system?

No. Contact lists can be built from admission and transfer data, staff schedules and patient assignments. A real-time location system, where you have one, adds proximity detail.

Does the product decide who was exposed?

No. It proposes contacts using rules your infection prevention team sets. Infection preventionists decide, and each decision is recorded with its reason.

How is staff health information protected?

Employee health works staff exposures in its own view. Infection preventionists see that follow-up happened, and unit managers see only whether a staff member is cleared to work.

Can it report to the health department for us?

It prepares line lists and summaries in the formats you agree. Your staff approve and submit them through their usual channels.

How is it priced?

As a subscription, usually measured by the number of facilities or licensed beds, with implementation charged separately. See Working with Moraph for what drives a quotation.

Is there an accessibility conformance report?

Ask for one through the procurement request form at /how-to-buy/request, naming the version you are evaluating.

Next steps

Evaluate Infection Control & Contact Tracing

Book a demonstration

See the product working with sample data, focused on your workflows.

Request a demonstration

Request a technical briefing

Architecture, integrations, security and hosting, with our engineers and your technical team.

Request a briefing

Factsheet

This page on two sides, to share with colleagues or add to your evaluation file.

Open the factsheet

Buying through a formal procurement? See How to buy for purchasing routes, accessibility conformance reports and company information. Documentation: Infection Control & Contact Tracing guides on docs.moraph.com (getting started and security guides are public; setup, administration and integration guides are for client accounts). Support: Infection Control & Contact Tracing support guide.

Related products